English
Tubus HDPE corrosioni resistens, ductus siliconis, imago principalis.
  • Tubus Silicii HDPE Corrosioni Resistens
  • Tubus Silicii HDPE Corrosioni Resistens
  • Tubus Silicii HDPE Corrosioni Resistens
  • Tubus Silicii HDPE Corrosioni Resistens
  • Tubus Silicii HDPE Corrosioni Resistens
  • Tubus Silicii HDPE Corrosioni Resistens

Tubus Silicii HDPE Corrosioni Resistens

Descriptio Brevis:


  • Exemplar:DW-SD

    • Detalia Producti

    Etiquettae Productarum

    Video Producti

    ia_23600000024

    Descriptio

    Ductus siliconis HDPE est genus tubi communicationis optici (electrici) protegentis, qui producitur et formatur per extrusionem synchronisticam materiae siliconis cum coefficiente frictionis humili intra tubum HDPE. Ita tubus HDPE cum nucleo siliconis commoditatem iaciendi funi praebet propter cuniculum solidum lubricantem cum durabilitate et coefficiente frictionis inferiore. Fit praesidium funiculi optici maxime provectum in mundo hodie. Eius progressus in substitutione extractionis personalis funiculi demonstratur.

     

    Machina funibus sufflans funem in tubum HDPE minoris frictionis insufflabit, et funis in statu suspenso magna celeritate progreditur. Haec ratio funibus ponendis damnum funis ex tractione factum vitat. Itaque, casus signorum amissio a machina trahenda magnopere imminutus est et nimii nodi ex limitatione longitudinis trahendi orti magnopere imminuti sunt. Simul, quantitates puteorum effodiendorum ad minimum rediguntur et sumptus operis conservati sunt.

     

    Ductus siliconis HDPE magnam intensitatem, praeclaram proprietatem resistendi temperaturis altis vel humilibus, adaptabilitatem ad mutationes praecipitii et flexionis habet.

     

    Commoda:

    1. Nulla amplius difficultas in distantia effectiva funis inflandi est et sumptus funis inflandi conservatur; in loco constructionis non amplius opus est machina inflandi, compressor et turmis funis ponendis, etc.
    2. Tempus constructionis magnopere breviatur, fossarum depositio simplicior est et problema limitis terrae solvitur, id est, collocatio ductuum et funium depositio simul fieri possunt, dummodo PCD in fossam effossam et repletionem inseratur.
    3. Sumptus inceptorum minue, inter quos vectura maritima ductuum et funium conservata, et constructionis.

     

    Numerus Item CONSTRUCTIO Materiae Crudae Dimensio Proprietates Physicae et Chemicae
    Materiae Diameter (D/d) Optiones Colorum Superficies Interna Index Fluxus Liquefactionis Densitas Robur Tensilis ad Cedendum Elongatio Ad Interruptionem Fissura Stressi Ambientalis
    Resiste (F50)    		 Diametros Exteriores
    (mm)    		 Crassitudo muri
    (mm)    		 Ovalitas
    (%, ante convolutionem)    		 Duritia Muri Exterioris
    (Litus-D)    		 Coefficiens Frictionis Internus Robur tensile apud cedendum Elongatio ad Rupturam Onus Trahens Maximum Radius Flexionis Post Refrigerationem Rigiditas Anuli Reversio Longitudinalis Pressio Aeris
    DW-SD2720 HDPE (Polyethylenum Altae Densitatis) 27.0mm/20.0mm Plene coloratus Lenis cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 27.0
    (-0.0, +0.3)    		 3.50
    (-0.2, +0.20)    		 ≤5 ≥59 ≤0.12 ≥21MPa ≥500% ≥4500N 560mm ≥30kN/m² ≤3.0% 1.6MPa
    DW-SD2824 HDPE (Polyethylenum Altae Densitatis) 28.0mm/24.0mm Plene coloratus Lenis cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 28.0
    (-0.0, +0.3)    		 2.00
    (-0.2, +0.20)    		 ≤7 ≥59 ≤0.12 ≥21MPa ≥500% ≥2800N 560mm ≥30kN/m² ≤3.0% 1.6MPa
    DW-SD3225 HDPE (Polyethylenum Altae Densitatis) 32.0mm/25.0mm Niger vel plene coloratus Lenis cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 32.0
    (-0.0, +0.3)    		 3.50
    (-0.2, +0.20)    		 ≤5 ≥59 ≤0.12 ≥21MPa ≥380% ≥5000N 300mm ≥40kN/m² ≤3.0% 1.6MPa
    DW-SD3226 HDPE (Polyethylenum Altae Densitatis) 32.0mm/26.0mm Plene coloratus Lenis cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 32.0
    (-0.0, +0.3)    		 3.00
    (-0.2, +0.20)    		 ≤5 ≥59 ≤0.12 ≥21MPa ≥380% ≥5000N 300mm ≥40kN/m² ≤3.0% 1.6MPa
    DW-SD3227 HDPE (Polyethylenum Altae Densitatis) 32.0mm/27.0mm Plene coloratus Lenis cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 32.0
    (-0.0, +0.3)    		 2.50
    (-0.2, +0.20)    		 ≤5 ≥59 ≤0.12 ≥21MPa ≥380% ≥4000N 300mm ≥30kN/m² ≤3.0% 1.6MPa
    DW-SD3228 HDPE (Polyethylenum Altae Densitatis) 32.0mm/28.0mm Plene coloratus Lenis cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 32.0
    (-0.0, +0.3)    		 2.10
    (-0.2, +0.20)    		 ≤7 ≥59 ≤0.12 ≥21MPa ≥380% ≥3000N 400mm ≥50kN/m2 ≤3.0% 1.2MPa
    DW-SD3326 HDPE (Polyethylenum Altae Densitatis) 33.0mm/26.0mm Plene coloratus Laevigata cum Silicio vel Costae Internae cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 33.0
    (-0.0, +0.3)    		 3.50
    (-0.2, +0.20)    		 ≤5 ≥59 ≤0.12 ≥21MPa ≥380% ≥5000N 300mm ≥40kN/m² ≤3.0% 1.6MPa
    DW-SD3832 HDPE (Polyethylenum Altae Densitatis) 38.0mm/32.0mm Plene coloratus Levis 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 38.0
    (-0.0, +0.3)    		 3.00
    (-0.2, +0.20)    		 ≤7 ≥59 ≤0.12 ≥21MPa ≥400% ≥6000N 440mm ≥30kN/m² ≤3.0% 1.6MPa
    DW-SD4032-RIBS HDPE (Polyethylenum Altae Densitatis) 40.0mm/32.0mm Plene coloratus Costae Internae cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 40.0
    (-0.0, +0.4)    		 4.00
    (-0.00, +0.35)    		 ≤5 ≥59 ≤0.08 ≥21MPa ≥500% ≥8500N 480mm ≥50kN/m2 ≤3.0% 2.5MPa
    DW-SD4032 HDPE (Polyethylenum Altae Densitatis) 40.0mm/32.0mm Plene coloratus Lenis cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 40.0
    (-0.0, +0.4)    		 4.00
    (-0.00, +0.35)    		 ≤5 ≥59 ≤0.08 ≥21MPa ≥500% ≥8500N 480mm ≥50kN/m2 ≤3.0% 2.5MPa
    DW-SD4033 HDPE (Polyethylenum Altae Densitatis) 40.0mm/33.0mm Plene coloratus Lenis cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 40.0
    (-0.0, +0.3)    		 3.50
    (-0.2, +0.20)    		 ≤5 ≥59 ≤0.12 (Dynamicum)
    ≤0.25 (staticum)    		 ≥21MPa ≥500% ≥8000N 400mm ≥50kN/m2 ≤3.0% 1.6MPa
    DW-SD4034 HDPE (Polyethylenum Altae Densitatis) 40.0mm/34.0mm Plene coloratus Lenis cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 40.0
    (-0.0, +0.3)    		 3.50
    (-0.2, +0.20)    		 ≤5 ≥59 ≤0.12 ≥21MPa ≥380% ≥6000N 400mm ≥30kN/m² ≤3.0% 1.6MPa
    DW-SD4035 HDPE (Polyethylenum Altae Densitatis) 40.0mm/35.0mm Plene coloratus Lenis cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 40.0
    (-0.0, +0.3)    		 3.50
    (-0.1, +0.20)    		 ≤10 ≥59 ≤0.12 ≥21MPa ≥380% ≥3000N 500mm ≥20kN/m² ≤3.0% 1.2MPa
    DW-SD4233 HDPE (Polyethylenum Altae Densitatis) 42.0mm/33.0mm Plene coloratus Costae Internae cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 42.0
    (-0.0, +0.4)    		 3.85
    (-0.00, +0.30)    		 ≤7 ≥59 ≤0.1 ≥21MPa ≥500% ≥12000N 800mm ≥30kN/m² ≤3.0% 2.5MPa
    DW-SD4236-RIBS HDPE (Polyethylenum Altae Densitatis) 42.0mm/36.0mm Plene coloratus Costae Internae cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 42.0
    (-0.0, +0.4)    		 3.00
    (-0.00, +0.30)    		 ≤7 ≥59 ≤0.1 ≥21MPa ≥500% ≥8000N 500mm ≥30kN/m² ≤3.0% 2.5MPa
    DW-SD4638 HDPE (Polyethylenum Altae Densitatis) 46.0mm/38.0mm Plene coloratus Lenis cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 46.0
    (-0.0, +0.3)    		 4.00
    (-0.20, +0.20)    		 ≤5 ≥59 ≤0.12 ≥21MPa ≥380% ≥10000N 1000mm ≥30kN/m² ≤3.0% 1.6MPa
    DW-SD5041 HDPE (Polyethylenum Altae Densitatis) 50.0mm/41.0mm Plene coloratus Lenis cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 50.0
    (-0.0, +0.4)    		 4.50
    (-0.30, +0.30)    		 ≤7 ≥59 ≤0.12 ≥21MPa ≥380% ≥12000N 1000mm ≥30kN/m² ≤3.0% 1.6MPa
    DW-SD5042-RIBS HDPE (Polyethylenum Altae Densitatis) 50.0mm/42.0mm Niger vel Personificatus Costae Internae cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 50.0
    (-0.0, +0.4)    		 4.00
    (-0.20, +0.20)    		 ≤7 ≥59 ≤0.1 ≥21MPa ≥400% ≥12000N 600mm ≥30kN/m² ≤3.0% 2.5MPa
    DW-SD5042 HDPE (Polyethylenum Altae Densitatis) 50.0mm/42.0mm Plene coloratus Lenis cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 50.0
    (-0.0, +0.4)    		 4.00
    (-0.30, +0.30)    		 ≤7 ≥59 ≤0.12 ≥21MPa ≥400% ≥12000N 1000mm ≥30kN/m² ≤3.0% 1.6MPa
    DW-SD5043 HDPE (Polyethylenum Altae Densitatis) 50.0mm/43.0mm Plene coloratus Lenis cum Silicio 0.1～ 0.3 g/10 minuta
    (190°C, 2.16 kg)    		 Minimum 0.940 g/cm³ Minimum 21MPa Minimum 350% Minimum 350 horae 50.0
    (-0.0, +0.4)    		 3.50
    (-0.1, +0.25)    		 ≤7 ≥59

    imagines

    ia_27800000040
    ia_27800000041
    ia_27800000042
    ia_27800000043
    ia_27800000044

    Involucrum

    ia_27800000046
    ia_27800000047
    ia_27800000048
    ia_27800000049

    Probatio producti

    ia_100000036

    Certificationes

    ia_100000037

    Societas Nostra

    ia_100000038
  • Praecedens:
  • Deinde:
    • Nuntium tuum hic scribe et nobis mitte.

    Producta similia

    Preme "Enter" ad quaerendum vel "ESC" ad claudendum